FAG super precise Ball Bearings

Detailed Product Description

Angular Contact Thrust Ball Bearings

The angular contact thrust ball bearings shown here were originally designed to support the rotary tables of drilling rigs but are also suitable for other applications where high load carrying capacity, high axial stiffness and low friction torque are important. In contrast to conventional thrust ball bearings, angular contact thrust bearings can accommodate radial loads in addition to axial loads and are able to operate at high speeds.

Single direction angular contact ball bearings
These are able to take up axial loads acting in one direction only. They are of separable type. The washers and ball and cage assembly can be mounted individually. In the main application, two bearings are adjusted against each other. The second bearing has to carry the weight of the drill when it is stationary and has a higher load carrying capacity than the first bearing.

Double direction angular contact thrust ball bearings
Here the upper bearing has the higher load carrying capacity and the smaller bearing in the opposite direction is combined with it to form a unit. These bearings have low height and can accommodate axial loads acting in both directions as well as moment loads. A single bearing can support rotating machine components in relation to stationary components.

Dimension
The dimensions of these bearings are by their main application (drilling rig rotary tables) and have not yet been standardized.

Tolerances


Misalignment - They cannot tolerate any misalignment of the shaft with respect to the housing or any angular misalignment.

Cages - They are produced either without cage or are fitted with machined brass cages centered on the shaft washer or the housing washer.